DP-CPU500 (MOACON CPU Module)
- SKU:
- L02001
- Shipping:
- Calculated at Checkout
Description
MOACON is an industrial modular controller that can be programmed in C language. If you can use ARDUINO, you can use it enough. Select only the desired I/O module and install it on the slot for use. One CPU module is required, and plug it into the leftmost side of the SLOT.
- 32-bit ARM Processor (ARM CORTEX)
- Clock Speed: 72MHz
- Program Memory: 512KB Flash Memory
- Data Memory: 64KB SRAM
- Non-volatile Memory: 32KB FRAM (Upgraded from 8KB in May 2013)
- Built-in Real-Time Clock and Battery
- Built-in RS-232 Port
- LCD and 7-Segment Control Port
- 24V Power Input (Built -in Power Regulator)
Related Products
Related Products
5 Slot Board
$39.00
If your requirements only require five modules or less, the 5 slot extension board can be used independently as a main board.
Includes ribbon cable and terminator.
L03001
10 Slot Board
$59.00
The main module board comes in a 10 slot configuration. If 10 slots are insufficient, a 5-slot extension board can be connected to the 10-slot board to increase the capacity for additional modules...
L03002
MOACON I/O Module
$0.00
MOACON is an industrial modular controller that can be programmed in C language. If you can use ARDUINO, you can use it enough. Select only the desired I/O module and install it on the slot for...
USB Cable (A/B type)
$3.00
MOACON / CB210 USB cable for downloading. This product is included in the START PACK.
Length : 6 ft (185cm)
L05003