CT1721C (Mono LCD + Touch + CUBLOC + I/O)
- SKU:
- U05006
- Shipping:
- Calculated at Checkout
Frequently bought together:
Description
BASIC and Ladder Logic Controller, Graphic LCD, and Touch Panel are fused into one product, CUTOUCH™. Replace outdated PLC, push-buttons, small LCD combo with 1 single CUTOUCH™.
- Menu/Graphics creation program for CUTOUCH. [
CUCANVAS v2.4.2] - Character design program for CUTOUCH. [ Pixel Studio v1.0]
- BMP Downloader program for CUTOUCH. [ BMP Downloader v1.07]
CUBLOC/CUTOUCH User's Manual| CT1721C | |
| Program Memory | 80KB |
| Data Memory | 24KB (BASIC) + 4KB (Ladder Logic) |
| EEPROM | 4KB |
| Language | BASIC with Ladder Logic |
| Ladder Scan time | 10mS |
| Digital Input | 32 opto-isolated input (7.5~30VDC) |
| Digital Output | 32 opto-isolated 24V DC sink Outputs |
| GPIO | 17 TTL 5V input or output 1 TTL 5V input |
| Analog Input | 8 channel 10 bit ADC 0~5V or 0~10V |
| External Interrupts | 4 channels |
| High speed counters | 2 channels 16 bit counter |
| Power | Required Power : 24V DC |
| Current consumption | at 25VDC w/ backlight on : 170mA backlight off : 70mA |
| RTC | Yes |
| Operating Temperature | 0 ~ 70 celsious |
| Size | 7.36" x 5.00" x 1.71" (187 x 127 x 43.5 mm) Viewing area (Touch area) : 4.5" x 3.4" (5.6" diagonal) |
Related Products
24VDC Power Supply (1.05A)
$22.00
Switching AC-DC ADAPTOR 120VAC IN, 24V 1.05A output
If you want to use it on a terminal block, cut out the ends and connect them as shown in the picture below.
At this time, you should watch the...
E01065
