24VDC Power Supply (1.05A)
- SKU:
- E01065
- Shipping:
- Calculated at Checkout
Frequently bought together:
Description
Switching AC-DC ADAPTOR 120VAC IN, 24V 1.05A output
If you want to use it on a terminal block, cut out the ends and connect them as shown in the picture below.
At this time, you should watch the polarity and connect.
Related Products
CPi-A070WR (7" Industrial Raspberry Pi Touch Panel PC)
$199.00
The ComfilePi is a Raspberry Pi-based industrial touch panel PC. ComfilePi is a controller that can use CODESYS. CODESYS is a development environment for programming controller applications...
A01001
CPi-A102WR (10.2" Industrial Raspberry Pi Touch Panel PC)
$299.00
The ComfilePi is a Raspberry Pi-based industrial touch panel PC. ComfilePi is a controller that can use CODESYS. CODESYS is a development environment for programming controller applications...
A01003
CPi-A150WR (15" Industrial Raspberry Pi Touch Panel PC)
$499.00
The ComfilePi is a Raspberry Pi-based industrial touch panel PC. ComfilePi is a controller that can use CODESYS. CODESYS is a development environment for programming controller applications...
A01005
CHA-070PR - 7" Open-Frame Human Machine Interface (HMI)
$149.00
The ComfileHMI is a WYSIWYG development kit for HMI projects. The ComfileHMI is a WYSIWYG development kit for HMI projects. Supports interfacing with the CUBLOC, MOACON, FA-DUINO, MODPORT,...
H00002
CHA-070WR - 7" Water-Resistant Human Machine Interface (HMI)
$199.00
The ComfileHMI is a WYSIWYG development kit for HMI projects. Supports interfacing with the CUBLOC, MOACON, FA-DUINO, MODPORT, or just about any other Modbus-capable PLC or microcontroller...
H00001
CHA-102WR - 10.2" Water-Resistant Human Machine Interface (HMI)
$299.00
The ComfileHMI is a WYSIWYG development kit for HMI projects. The ComfileHMI is a WYSIWYG development kit for HMI projects. Supports interfacing with the CUBLOC, MOACON, FA-DUINO, MODPORT,...
H00005
