Description
The PT100Ω is a temperature sensor widely used in the industrial field because it can measure a wide range of temperatures from -100 to +500 degrees Celsius. The ML-THRT1 module converts the resistance value of the PT100Ω sensor to a digital temperature value. Simply read the digital value via Modbus RTU over RS-485.
PT100Ω temperature probe sold separately.
Related Products

PT100
MSRP:
Now:
$15.00
Was:
PT100Ω sensor (3 line)
RS-THRT4, ML-THRT1 (Temperature Input Module) with use.
Length : 6.56 ft (2m)
L05004
Customers Also Viewed

MODPORT I/O Module
MSRP:
Now:
$0.00
Was:
This product is used to extend I/O capabilities of the ComfilePi+CODESYS or as a companion to the ComfileHMI, but can also be used as a Modbus slave for any RS-485 Modbus capable application...


FA-DUINO-32TA (Industrial ARDUINO)
MSRP:
Now:
$89.00
Was:
The FA-DUINO is an Arduino-based industrial controller. It has features similar to those found in other Arduino products and can be programmed with the Arduino IDE.
16 24VDC Inputs, 14...
E01027


CPi-A070WR (7" Industrial Raspberry Pi Touch Panel PC)
MSRP:
Now:
$279.00
Was:
The ComfilePi is a Raspberry Pi-based industrial touch panel PC.
If you are embarking on a new project, or this product is not currently available, please consider the...
A01001

MD-H485 (MODPORT Header module)
MSRP:
Now:
$19.00
Was:
This product is used to extend I/O capabilities of the ComfilePi+CODESYS or as a companion to the ComfileHMI, but can also be used as a Modbus slave for any RS-485 Modbus capable application...
M00101
CP-IO22-A4-2 (Digital & Analog I/O Board for the CPi)
MSRP:
Now:
$89.00
Was:
IO board accessory for the ComfilePi consisting of 22 digital IO (11 inputs, 11 outputs), 4 16-bit analog inputs, 2 12-bit analog outputs, screw terminals, and indicator LEDs. It can be mounted to...
A02004

PT100
MSRP:
Now:
$15.00
Was:
PT100Ω sensor (3 line)
RS-THRT4, ML-THRT1 (Temperature Input Module) with use.
Length : 6.56 ft (2m)
L05004


FA-DUINO-24RA (Industrial ARDUINO)
MSRP:
Now:
$99.00
Was:
The FA-DUINO is an Arduino-based industrial controller. It has features similar to those found in other Arduino products and can be programmed with the Arduino IDE.
16 24VDC Inputs, 8...
E01020


CHA-070WT - 7" Water-Resistant Human Machine Interface (HMI)
MSRP:
Now:
$219.00
Was:
The ComfileHMI is a WYSIWYG development kit for HMI projects. Supports interfacing with the CUBLOC, MOACON, FA-DUINO, MODPORT, or just about any other Modbus-capable PLC or microcontroller...
H00003

DP-CPU500 (MOACON CPU Module)
MSRP:
Now:
$129.00
Was:
MOACON is an industrial modular controller that can be programmed in C language. If you can use ARDUINO, you can use it enough. Select only the desired I/O module and install it on the slot for...
L02001

CB210 (CUBLOC Core module)
MSRP:
Now:
$49.00
Was:
CB210 is for CUBLOC beginners. It has the same appearance as the Arduino UNO, and the usage is similar. CUBLOC is able to process BASIC and Ladder Logic diagram simultaneously through on-chip...
U01012